 |
 |
 |
 |
Single piece foam surround (Enough for 1 speaker)
This ANGLE-ATTACHED foam rear mounts to 9-5/8" cones and front mounts to 9-3/4" cones on the following JBL speakers :
JBL 121A, 122A, 126A, 128H, 128, 129H, 2203H, 4315, 4411, 120Ti, 2203A, 312G, 4411 L, 4411 R, 4412 L, 4412 R, CF120, HT1S, J-5120, J5120, L-112, L112, L-150, L150, L-150A, L150A, L-150B, L150B, L-166, L166, L-212, L212, L-65, L65, L-65A, L65A, L-65B, L65B, LC312-1, LC3121, PR-300, PR300, S-101, S101, S-2600 L, S2600L, S-2600R, S2600R, S-3S L, S3SL, S-3S R, S3SR and others that match the measurements below
Same surrounds that professional reconers use; THE BEST QUALITY foam available!
This is the foam only. Complete repair kits are available in our DIY Foam Surround Repair Kits category.
Foam Dimensions ------
Surround | A12-JBL |
Outer Diameter | 11.625" - 295mm |
Outer Roll Diameter | 10.75" - 273mm |
Cone Diameter | 9.625" - 244mm |
Inner Diameter | 8.875" - 225mm |
Roll Width | 5/8" - 16mm |
Inner Attachment | Angled |
|
|
 |
 |
 |
 |

|